SVD-8:
Distribution Panel with Differential Drive
Expands the SVC-10 distribution capabilities from one to eight locations with IR control at each location, up to 1,000 feet away on each of eight locations
S-Video
Modulation
SVM-22:
Two-input S-video Modulator
Modulates two S-video or composite video and MTS stereo
audio inputs to two programmable TV channels. Two S-video
and composite video full loop through outputs, connection
for two IR emitters, can remotely power DA & H838
series amplifiers
SVM-24:
Four-input S-video Modulator
Modulates four S-video or composite video and MTS stereo
audio inputs to four programmable TV channels, Four
S-video and composite video full loop through outputs,
connection for four IR emitters, can remotely power
DA & H838 series amplifiers
2100A:
12-volt In-wall IR Interface
Terminates output from DA-550 series amplifiers and provides IR target and emitter connections, 12-volt systems only
2171:
Single-head IR Emitter
Single-head IR Emitter that connects to video hub, 2100A and 2010 in-wall interfaces, or to a 5500 series modulator
2743: Cable Set
Allows the signals to be looped through without the use of a Y adapter
DA-550BID:
Bi-directional RF Distribution Amplifier with 12-volt
IR
Bi-directional RF distribution amplifier with one input for CATV, two inputs for modulators and eight outputs for televisions plus 12-volt IR control, DTV capable, bandwidth: 54 MHz - 1000 MHz forward; 5 MHz - 42 MHz reverse
DA-550HHR:
High-headroom RF Distribution Amplifier with 12-volt
IR
High-headroom RF distribution amplifier with one input for CATV or off-air antenna, two inputs for modulators and eight outputs for televisions plus 12-volt IR control, DTV capable, bandwidth: 5 MHz - 1000 MHz forward only
