|
|
|
|
 |
|
DA-500A:
RF Amplifier
RF amplifier with 18 dB of gain, DTV capable, bandwidth 50 MHz - 1000 MHz forward only |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
SVM-22:
Two-input S-video Modulator
Modulates two S-video or composite video and MTS stereo
audio inputs to two programmable TV channels. Two S-video
and composite video full loop through outputs, connection
for two IR emitters, can remotely power DA & H838
series amplifiers
|
|
|
|
 |
|
SVM-24:
Four-input S-video Modulator
Modulates four S-video or composite video and MTS stereo
audio inputs to four programmable TV channels, Four
S-video and composite video full loop through outputs,
connection for four IR emitters, can remotely power
DA & H838 series amplifiers
back
to top
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| All-In-Ones
and Video Distribution Systems |
|
|
|
 |
|
3015:
Two-input Video Distribution System
Modulates a single audio/video source to a custom TV channel and distributes antenna/CATV signals to four locations, DTV capable, bandwidth: 40 MHz - 1000 MHz forward only
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
2509-10:
9dB Tap (10-pack)
Provides minimal insertion loss through the output (1
dB), while allowing a signal to be tapped from the original
source with high loss (9 dB). Can be used in reverse to
combine very high signals with low to normal signals,
DTV capable
|
|
|
|
|
|
|
 |
|
2743:
Cable Set
Allows the signals to be looped through without the use of a Y adapter
|
|
|
|
|
|
|
 |
|
LPF-380:
Low-pass Filter
Removes all channels above the 380 MHz pass band, allowing
insertion of locally-generated modulated channels, passes
off-air TV channels 2-13 and CATV channels 2-50
|
|
|
|
 |
|
LPF-470:
Low-pass Filter
Removes all channels above the 470 MHz pass band, allowing insertion of locally-generated modulated channels, passes off-air TV channels 2-13 and CATV channels 2-64
|
|
|
|
 |
|
LPF-600:
Low-pass Filter
Removes all channels above the 600 MHz pass band, allowing insertion of locally-generated modulated channels, passes off-air TV channels 2-35 and CATV channels 2-86
|
|
|
|
 |
|
LPF-750:
Low-pass Filter
Removes all channels above the 750 MHz pass band, allowing insertion of locally-generated modulated channels, passes off-air TV channels 2-60 and CATV channels 2-116
|
|
|
|
 |
|
NF-469:
Notch Filter
Removes CATV channels 64-70 and UHF channels 14-19, allowing insertion of locally-generated modulated channels, passes all other channels
|
|
|
|
 |
|
NF-470:
Notch Filter
Removes CATV channels 70-74 and UHF channels 19-23, allowing insertion of locally-generated modulated channels, passes all other channels
|
|
|
|
|
|
NF-471:
Notch Filter
Removes CATV channels 75-80 and UHF channels 24-29, allowing insertion of locally-generated modulated channels, passes all other channels
|
|
|
|
 |
|
TC-200A:
Tilt Compensator
Provides a balanced signal level by compensating for high frequency cable loss allowing all signal levels on all channels to be of equal amplitude at distant locations
|
|
|
|
 |
|
V902:
Satellite Signal Diplexer
Allows lower frequency signals from an off-air antenna or modulator and higher frequency signals from a satellite dish LNB to be combined onto one coax cable and then separated at the receiver/TV locations
back
to top
|
|
